Browsing Category: Laser Cutting

MS laser cutting uses a fiber laser to cut mild steel sheet and plate, with an assist gas clearing the molten metal. It handles everything from thin sheet to roughly 20mm plate, holding a tolerance near ±0.1mm. The result is clean edges, no tooling cost and fast turnaround, which suits both precision and volume jobs.

A laser-cut metal gate is made by cutting a pattern into mild steel, stainless steel or aluminium sheet using a CNC fiber laser, then welding the panel onto a reinforced frame. This laser cut gate design creates precise geometric, floral or custom motifs without assembling every pattern from separate bars. A modern laser cutting gate design can balance decorative cutouts with solid areas for privacy.

An iron jali design for a home is a perforated iron screen that lets air and light through while giving privacy and security. It is used on windows, doors, balconies, gates, and facades. Bold patterns with wider gaps work best in iron, and a protective coating is essential to prevent rust.

The CNC laser cutting price per sq ft in India depends on machine time, material type, thickness, assist gas, setup, and design complexity. Shops may charge per sq ft, per mm, per meter, per cut, or per machine minute. Indicative rates can range from ₹15 to ₹120+ per sq ft, depending on the job and material.

CNC laser cutting in Delhi NCR is usually quoted on machine time, material and thickness, with small standard parts often around ₹15-₹60 each. Simple jobs can dispatch within 24 hours, while most run 3–7 days. Fiber lasers typically hold about ±0.1mm on cut features. All figures are indicative; your CAD file sets the final quote.

Sheet metal laser cutting works reliably on mild steel, stainless steel, aluminium, brass and copper on a modern fiber laser. Typical maximum thicknesses: mild steel ~20–25mm, stainless steel ~15–20mm, aluminium ~12–15mm, and brass/copper ~6–8mm -all figures rise with higher laser power and drop on older or lower-power machines

For cutting metal, a fiber laser cutting machine is the right choice in almost every case - it cuts steel, aluminium, copper and brass faster, costs less to run, and needs less maintenance. A CO2 laser cutting machine only wins when you're also cutting non-metals like wood or acrylic, or working with very thick plate.

Laser cutting machine price in India runs from roughly ₹2–6 lakh for small desktop/CO2 machines, ₹8–50 lakh for entry-to-mid fiber laser machines, and ₹80 lakh to several crore for high-power industrial systems. If you're outsourcing the work instead of buying, job-work laser cutting is typically billed ₹500–2,500 per hour or a few rupees per millimetre/foot of cut, depending on material and thickness. All figures are indicative 2026 ranges and vary by supplier,...